PS Foam Disposable Fast Food Container Making Machinery HR 105 /
120
1. PS Foam Sheet Extruder
Product introduction:
This production line adopts double-screw foam sheet extrusion
technology. PSP foam sheet is a kind of new-type packing material
with the features of heat preservation, safety, sanitation and good
plasticity. It’s mainly used to make various types of food
containers, such as lunch box, dinner trays, bowls etc by
thermoforming. It’s also can be used to make advertisement board,
industrial products packing and so on. It has stable performance,
big capacity, high automation and yields quality products.
Main parameters:
| Item | Unit | Parameter |
| Model | | HR105-120 |
| Applicable materials | | GPPS granule |
| Thickness of sheet | mm | 1-4 |
| Width of sheet | mm | 540/1080 |
| Foaming rate | | 12-20 |
| Bulk weight of product | Kg/m³ | 50-83 |
| Thermal conductivity of product | W/m.k | 0.021-0.038 |
| Output | kg/h | 150-200 |
| Rated power | Kw | 200 |
| Power supply | | three phase 380v/50Hz |
| External dimension | mm | 25000×7000×3000 |
| Complete weight | Ton | About12 |
2. Auto PS foam forming and cutting machine
The working process as below:
Feeding ---heating area (heating by the remote infrared ceramic
heater)--forming area (vacuum Forming, press forming and
synthetically forming) --Pneumatic cutting knife (cut the shaped
sheet into pieces) –scrap winding.
1. It can produce PS foam food box/container, foam (egg/meat) tray,
hamburger box, foam plates/bowl, fruit tray, etc. The foam
container has a feature of shock-resistance, crush- resistance,
heat insulation, etc. It is widely used to pack the heat and frozen
food in supermarkets, stores and etc.
2. Fully automatic forming and cutting machine integrates forming,
cutting and stacking (trimming) at the same time. It has the
features of labor-saving, high efficiency, energy-saving
properties. It adopts PLC controller and touch screen to control
the working program.
2. It is an all-powerful thermal forming machine with the
integration of vacuum forming and cutting.
4. It adopts a remote infrared ceramic heater in the heating zone,
with which the machine gets the most stable and even temperature.
5. It adopts the temperature digital control system, which is
convenient for the workers to know the temperature of each heating
zone quickly. Also, it easily operates and makes more efficient.
6. It features reliable stability, large forming area, and fast
speed, as well as a high degree of automation & economic on
manpower.
Technical parameters:
| Item | Unit | Parameter |
| Model | / | HR-M1080 |
| Power supply | / | Three phase 380V/50Hz |
| Production efficiency | s/mold | 4-5 |
| Installed power (approximately) | KW | 168 |
| Total weight (approximately) | Ton | 16 |
| Mounting size | m | 12×2×2.6 |
| Compressed air capacity | m3/min | 0.4～0.7 |
| Compressed air pressure | Mpa | 0.7 |
| Cooling water | T/h | 1 |
Application
3. PS recycling and pelletizing machine
This machine is special for polystyrene. It adopts double screw
plasticification, increasing compress ratio. The whole machine
consists of crusher, feeder, extruder, cooling tank and granulator.
It can recycle many foamed products, such as PS, XPS, EPS etc.
| Model | HR-180+120/100 |
| Screw Diameter | Φ180+120/Φ100 |
| Total power | 80kw |
| Power supply | three phase 380V/50Hz |
| Number of heating zones | 7 |
| Throughput | 120-200kg/h |
| Dimension size | 4300*1100*2000 |
| Total weight | 3 |
| Applicable materials | PS foam scrap |
